This project is a portable Raspberry Pi computer.
This project is a portable Raspberry Pi computer.
This project uses the Arduino board and the CAN-BUS shield .
This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver.
This project is a demo of using the serial LCD module in I2C mode driving a 16×2 LCD with LED backlight.
The micro-controller driving the LCD2S is the PIC18F2480 on a SBC28PC-IR2 board but you can use any controller with an I2C Master.
