Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

15.50 Ex VAT
18.60 Inc VAT

#3263

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long time we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. Now we're happy to offer a great new thermocouple amplifier/converter that can handle just about any type of thermocouple, and even has the ability to give you notification when the temperature goes out of range, or a fault occurs. Very fancy!

This converter communicates over 4-wire SPI and can interface with any K, J, N, R, S, T, E, or B type thermocouple.

This breakout does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). We even added inline resistors and a filter capacitor on-board for better stability, as recommended by Maxim. Goes great with our 1m K-type thermocouple or any other thermocouple, really!

  • Works with any K, J, N, R, S, T, E, or B type thermocouple
  • -210C to +1800C output in 0.0078125 resolution - note that many thermocouples have about 2C to 6C accuracy or worse depending on the temperature and type, so the resolution will be a lot better than the accuracy!
  • Internal temperature reading
  • 3.3 to 5v power supply and logic level compliant!
  • SPI data requires any 4 digital I/O pins
Please note: this does not include a thermocouple!

Features
  • Product Dimensions: 25.0mm x 22.0mm x 3.0mm / 1.0" x 0.9" x 0.1"
  • Product Weight: 3.5g / 0.1oz
Documents

Add to Cart:

  • Model: MAX31856-BRK

Copyright © 2017 SK Pang Electronics Ltd