| Model |
Product Image |
Item Name |
(Ex VAT) Price |
| TEENSYLC |
 |
Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware peripherals, at a very affordable price! Teensy-LC... |
£12.10
|
| TEENSY32 |
 |
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex... |
£19.50
|
| TEENSY4 |
 |
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features... |
£19.95
|
| TEENSY35 |
 |
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.5 comes pre-flashed with a... |
£24.90
... more info
|
| TEENSY36 |
 |
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a... |
£28.90
|
| TEENSY41 |
 |
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a... |
£25.45
|
| TEENSY-PROP |
 |
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features... |
£22.10
|
| TEENSY-AUDIO |
 |
DEV-12767 Description: This is the Teensy Audio board add-on for the Teensy 3.0 and 3.1 development boards. This audio board provides you with an... |
£14.90
|
| TEENSY-WS2811 |
 |
This adapter board connects the Teensy 3.1 to up to thousands of WS2811/WS2812 (a.k.a NeoPixel) LEDs using the OctoWS2811 Library. It features a... |
£12.50
|
| CANBUS3V3-BRK |
 |
This is a CAN-Bus breakout board using Texas Instruments SN65HVD231 High Speed CAN Transceiver IC operates at 3.3v. The output pins are on both screw... |
£12.90
|
| LCD-22TFTLC |
 |
This is a 2.2" colour TFT display, 320x240 with ILI9341 Controller Chip. It uses 4-wire SPI interface to communicate with a micro controller. ... |
£7.10
... more info
|
| TEENSY-KIT |
 |
This is a starter kit with a Teensy 3.2 to get you going. The Teensy board has pre-soldered header pins so no soldering are required. Kit Contents ... |
£42.80
|
| TEENSY-CAN-DEMO |
 |
This is a CAN-Bus demo board with Teensy 3.2 included. It has a large 2.8" colour TFT display and click wheel navigation. Features Teensy... |
£59.50
|
| TEENSY-SIM |
 |
This is a CAN-Bus ECU simulator using the Teensy 3.2 module (included). Useful for testing OBDII interface and writing diagnostic software. ECU PIDs... |
£109.00
|
| TEENSY-CAN-BRK |
 |
This is a CAN-Bus breakout board for use with the Teensy 3.2 (included). It has on board 5v regulator and reverse voltage protection. CAN transceiver... |
£36.90
|
| TEENSY-OLED128X64 |
 |
A monochrome 1.3" 128x64 OLED graphic display for use with the Teensy CAN-Bus breakout board. Features 1.3" 128x64 OLED displaySoldered... |
£19.90
... more info
|
| TEENSY-FTH |
 |
#3200Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and... |
£4.95
|
| TEENSY-VIEW |
 |
LCD-14048The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. The 128x32 monochrome... |
£12.90
|
| TEENSY-OLED128X128 |
 |
This is a CAN-Bus demo board for use with the Teensy 3.2 (included) with a 1.5" 128x128 colour OLED display. It has on board 5v regulator and... |
£69.50
... more info
|
| TEENSY36-CAN-BRK |
 |
This is a dual channel CAN-Bus breakout board for use with the Teensy 3.6 (included). It has on board 5v regulator and reverse voltage protection.... |
£58.00
|
| TEENSY36-CANFD-BRK |
 |
This is a Teensy 3.6 board with CAN 2.0B and CAN FD interface. The CAN FD is supplied by the Microchip MCP2517FD CAN FD controller with MCP2562FD CAN... |
£71.20
|
| TEENSY-CANFD-BRK |
 |
This is a CAN-Bus FD breakout board with Microchip MCP2517FD and Teensy 3.2.It has on board 5v regulator and reverse voltage protection. CAN FD... |
£48.50
|
| TEENSY36-CANFD-DEMO |
 |
This is a CAN 2.0B and CAN FD demo board with Teensy 3.6 fitted and large 2.8" TFT LCD. Features Teensy 3.6 fitted2.8" Colour TFT... |
£82.00
|
| TEENSY32-CANLIN-BRK |
 |
This is a CAN-Bus breakout board for use with the Teensy 3.2 (included). It has on board 5v regulator and reverse voltage protection. CAN transceiver... |
£48.50
|
| T4-TRIPLECAN28 |
 |
This is Teensy 4.0 board with two CAN2.0B and one CAN FD interface and a large 2.8" colour TFT LCD. It can be powered by an external +12v DC... |
£74.00
|
| T4-154IPSLCD |
 |
This is Teensy 4.0 board with CAN FD and a 1.54" 240x240 wide angle IPS TFT LCD display with microSD holder. Features Teensy 4.0... |
£55.90
|
| T4-TRIPLECAN |
 |
This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse voltage... |
£46.00
|
| T4-3XCAN240X240LCD |
 |
This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse voltage... |
£64.90
|
| T4-CANFD2USB |
 |
This board uses the Teensy 4.0 as a CAN FD to USB converter. The Teensy 4.0 has high speed 480Mbit/s USB HS interface. MCP2558FD CAN FD transceiver... |
£46.00
|
| T4-TRIPLECAN35 |
 |
This is a Teensy 4.0 (installed) with two CAN2.0 and one CAN FD port. A 480x320 3.5" capacitive touch screen with ILI9488 LCD controller.... |
£84.00
|
| T41-3XCAN240x240LCD |
 |
This is a Teensy 4.1 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse voltage... |
£67.90
|
| T41-3XCANETH |
 |
This is a Teensy 4.1 board with triple CAN connections and ethernet magjack. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC... |
£77.90
|
| ESP-PSRAM64H |
 |
The ESP-PSRAM64H is a 64 Mbit (8 Megabyte) serial pseudo SRAM device, organized in 8 M x 8 bits and in a compact SOIC-8 package. It is fabricated... |
£1.60
... more info
|
