New Products




CAN-BUS Interface for NetIO GC10 Geiger Counter

Add:
CAN-BUS Interface for NetIO GC10 Geiger Counter
Model: CAN-UARTGC10
Price: 42.20

This CAN-Bus interface board will convert the serial output from the GC10 to CAN message and vice versa. The CAN baud rate is programable via a CAN ... more info

Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout

Add:
Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
Model: SHT31-D-BRK
Price: 10.90

#2857 Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a ... more info

Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor

Add:
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
Model: APDS9960-BRK
Price: 6.50

#3595 This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your ... more info

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

Add:
Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE
Model: TRINKETM0
Price: 8.20

#3500 The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a ... more info

Adafruit GEMMA M0 - Miniature wearable electronic platform

Add:
Adafruit GEMMA M0 - Miniature wearable electronic platform
Model: GEMMAM0
Price: 9.10

#3501 The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and ... more info

CAN-BUS to UART Converter

Add:
CAN-BUS to UART Converter
Model: CAN-UART
Price: 38.90

This board converts CAN-bus data into UART and vice versa. CAN and UART baud rate is programable via a CAN message. The UART has a standard pinout. ... more info

2 x 20 Extender for Raspberry Pi Hat

Add:
2 x 20 Extender for Raspberry Pi Hat
Model: RSP-2X20CONN
Price: 1.80

This is a 2 x 20 Extender connector as used in the PiCAN2 board. The height of the body is 8.51mm and pin length is 4.93mm

Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2

Add:
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Model: CCS811-BRK
Price: 17.40

Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 ... more info

Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi

Add:
Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi
Model: RSP-OLED128X32
Price: 13.10

If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The ... more info

LappKabel UNITRONIC CAN-BUS Cable 2 x 2 x 0.22mm

Add:
LappKabel UNITRONIC CAN-BUS Cable 2 x 2 x 0.22mm
Model: CAN-CABLE2X2
Price: 2.50

This is a high quality CAN-Bus cable in purple colour. The cable is UL and CSA approved. There are two pairs of cable, the second pair can be use for ... more info

CAN-Bus IO Board 8 Channel digital in + 8 Channel digital out

Add:
CAN-Bus IO Board 8 Channel digital in + 8 Channel digital out
Model: CANBUS-DIO16
Price: 89.50

This board provides 8 channel digital inputs and 8 channel digital outputs. The input are 5v TTL level. The output is an open collector with a ... more info

Teensy 3.6 Dual CAN-Bus Breakout Board Include Teensy 3.6

Add:
Teensy 3.6 Dual CAN-Bus Breakout Board Include Teensy 3.6
Model: TEENSY36-CAN-BRK
Price: 55.00

This is a dual channel CAN-Bus breakout board for use with the Teensy 3.6 (included). It has on board 5v regulator and reverse voltage protection. ... more info

Big Dome Pushbutton - Blue

Add:
Big Dome Pushbutton - Blue
Model: SW-BIGDOME-BLU
Price: 8.10

Its the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with ... more info

Adafruit HUZZAH32  ESP32 Feather Board

Add:
Adafruit HUZZAH32 ESP32 Feather Board
Model: FTHR-ESP32
Price: 18.20

#3405 Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed ... more info

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Add:
Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue
Model: FTHR-LEDMATRIX08-BLU
Price: 12.20

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our ... more info

1kg of Random electronic bits

Add:
1kg of Random electronic bits
Model: RANDOM1KG
Price: 12.90

This box is a 1kg random electronic bits. In the box could be new boards, old boards, faulty boards, electronic components, wires, breadboard, bare ... more info

Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi

Add:
Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi
Model: RSP-RTC
Price: 5.50

PRODUCT ID: 3386This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is ... more info

Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix

Add:
Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix
Model: DOTSTAR8X8
Price: 24.45

PRODUCT ID: 3444 Do not eat this LED grid just because it is so colorful and bite-sized! This is the tiniest little LED grid we could make, with 64 ... more info

Adafruit GPIO Reference Card for Raspberry Pi Model B+/Pi 2/Pi 3

Add:
Adafruit GPIO Reference Card for Raspberry Pi Model B+/Pi 2/Pi 3
Model: RSP-REFCARD
Price: 2.20

This board makes connecting wires to the Raspberry Pi GPIO incredibly easy. It's a reference board that makes it really easy to see if you're ... more info

Adafruit Feather HUZZAH with ESP8266 WiFi

Add:
Adafruit Feather HUZZAH with ESP8266 WiFi
Model: FTHR-EP8266
Price: 14.20

#2821Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new ... more info


Copyright © 2017 SK Pang Electronics Ltd