New Products




USB To CAN FD Converter

... more info
Sold Out
USB To CAN FD Converter
Model: CAN-FD-USB
Price:

This board is a USB to CAN FD converter. It uses the Microchip MCP2517FD controller with a MCP2562FD transceiver. Features Conforms to ... more info

Adafruit Feather M0 Express - Designed for CircuitPython - ATSAM

Add:
Adafruit Feather M0 Express - Designed for CircuitPython - ATSAM
Model: FTHR-CPATSAMD21-M0
Price: £16.90

#3403We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with ... more info

Circuit Playground Express

Add:
Circuit Playground Express
Model: cp-express
Price: £21.60

#3333 Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit ... more info

MCP2517FD CAN-Bus FD Board for Raspberry Pi 3

... more info
Sold Out
MCP2517FD CAN-Bus FD Board for Raspberry Pi 3
Model: RSP-PICANFD
Price:

This PiCAN FD board provide CAN-Bus FD capability for the Raspberry Pi. It uses the Microchip MCP2517FD CAN controller with MCP2562FD CAN ... more info

Microchip MCP2517FD CAN FD Breakout Board

Add:
Microchip MCP2517FD CAN FD Breakout Board
Model: MCP2517FD-BRK
Price: £35.00

This is a breakout board with the Microchip MCP2517FD CAN FD controller and the MCP2562FD CAN Bus transceiver.  Features  Conforms to ... more info

CAN-BUS Interface for NetIO GC10 Geiger Counter

Add:
CAN-BUS Interface for NetIO GC10 Geiger Counter
Model: CAN-UARTGC10
Price: £42.20

This CAN-Bus interface board will convert the serial output from the GC10 to CAN message and vice versa. The CAN baud rate is programable via a CAN ... more info

Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout

Add:
Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
Model: SHT31-D-BRK
Price: £10.90

#2857 Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a ... more info

Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor

Add:
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
Model: APDS9960-BRK
Price: £6.50

#3595 This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your ... more info

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

Add:
Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE
Model: TRINKETM0
Price: £8.20

#3500 The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a ... more info

Adafruit GEMMA M0 - Miniature wearable electronic platform

Add:
Adafruit GEMMA M0 - Miniature wearable electronic platform
Model: GEMMAM0
Price: £9.10

#3501 The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and ... more info

CAN-BUS to UART Converter

... more info
Sold Out
CAN-BUS to UART Converter
Model: CAN-UART
Price: £38.90

This board converts CAN-bus data into UART and vice versa. CAN and UART baud rate is programable via a CAN message. The UART has a standard pinout. ... more info

2 x 20 Extender for Raspberry Pi Hat

Add:
2 x 20 Extender for Raspberry Pi Hat
Model: RSP-2X20CONN
Price: £1.80

This is a 2 x 20 Extender connector as used in the PiCAN2 board. The height of the body is 8.51mm and pin length is 4.93mm

Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2

Add:
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Model: CCS811-BRK
Price: £17.40

Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 ... more info

Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi

Add:
Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi
Model: RSP-OLED128X32
Price: £13.10

If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The ... more info

LappKabel UNITRONIC CAN-BUS Cable 2 x 2 x 0.22mm²

Add:
LappKabel UNITRONIC CAN-BUS Cable 2 x 2 x 0.22mm²
Model: CAN-CABLE2X2
Price: £2.50

This is a high quality CAN-Bus cable in purple colour. The cable is UL and CSA approved. There are two pairs of cable, the second pair can be use for ... more info

CAN-Bus IO Board 8 Channel digital in + 8 Channel digital out

Add:
CAN-Bus IO Board 8 Channel digital in + 8 Channel digital out
Model: CANBUS-DIO16
Price: £89.50

This board provides 8 channel digital inputs and 8 channel digital outputs. The input are 5v TTL level. The output is an open collector with a ... more info

Teensy 3.6 Dual CAN-Bus Breakout Board Include Teensy 3.6

Add:
Teensy 3.6 Dual CAN-Bus Breakout Board Include Teensy 3.6
Model: TEENSY36-CAN-BRK
Price: £58.00

This is a dual channel CAN-Bus breakout board for use with the Teensy 3.6 (included). It has on board 5v regulator and reverse voltage protection. ... more info

Big Dome Pushbutton - Blue

Add:
Big Dome Pushbutton - Blue
Model: SW-BIGDOME-BLU
Price: £8.10

 It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with ... more info

Adafruit HUZZAH32 – ESP32 Feather Board

... more info
Sold Out
Adafruit HUZZAH32 – ESP32 Feather Board
Model: FTHR-ESP32
Price: £18.20

#3405 Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed ... more info

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Add:
Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue
Model: FTHR-LEDMATRIX08-BLU
Price: £12.20

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our ... more info


Copyright © 2017 SK Pang Electronics Ltd