Products

ROB-13656These steppers are a great way to get things moving, especially when positioning and repeatability is a concern.Note: This is a uni-polar ...

sku: ROB-10848These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft ...

ROB-10846These steppers are a great way to get things moving, especially when positioning and repeatability is a concern.Features Step Angle (degre...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator ca...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator c...

sku: ROB-09238 This is a simple, but very powerful stepper motor with a 4-wire cable attached. Features Step Angle (degrees) :1.8 2 Phase Ra...

Pololu item #: 1204 This small hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allo...

Pololu item #: 1205 This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.5 V, allowing fo...

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the mini...

This is a STM32G431 Nucleo board and a CAN-bus shield with two potentiometers, two push button switches and four LEDs. The STM32G431 board is pre-p...

sku: COM-08860 Huge 10mm through hole LEDs. Mood-light an entire wall! Features 465-470nm Blue 3.0-3.4VDC Forward Voltage 80mA Forward Curre...

sku: COM-08861 Huge 10mm through hole LEDs. Features 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewi...

sku: COM-08862 Huge 10mm through hole LEDs.  Mood light an entire wall! Features 625-630nm Red 2.1-2.3VDC Forward Voltage 80mA Forward C...

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the...

T Joining plates, in packs of 8. OpenBeam's T joining plate is injection molded out of EMS Grivory GVX, a high-performance, high glass fiber rein...

sku: COM-10302 These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total...

Slim clicky momentary switches are standard input "buttons" on electronic projects. These are half the width of classic 6mm tactile switches so th...

This tiny board is an easy way to use Toshiba's TB6612FNG dual motor driver, which can independently control two bidirectional DC motors. An operat...

#3200 Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and...

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It featur...

This is a CAN FD and LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN FD and LIN-...

This is Teensy 4.0 board with CAN FD and a 1.54" 240x240 wide angle IPS TFT LCD display with microSD holder. Features Teensy 4.0 (installed...

This board uses the Teensy 4.0 as a CAN FD to USB converter. The Teensy 4.0 has high speed 480Mbit/s USB HS interface. MCP2558FD CAN FD transcei...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector. This board includes a 480x320 3.5" capacitive touch screen with ILI...

This is a Teensy 4.0 board Classic CAN and CAN FD training board. On board are four potentiometers, LED, RGB LED and switches. This board can...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 480x320 3.5" capacitive touch screen with ILI9488 LCD cont...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 800x480 4.3" capacitive touch screen with SSD1963 LCD cont...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 800x480 5.0" capacitive touch screen with SSD1963 LCD cont...

This is a CAN FD and 2 channel LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN F...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector for use on a NMEA2000 network. This board includes a 800x480 5.0" ca...

This is a NMEA 2000 simulator using the Teensy 4.0 module (included). Useful for testing NMEA 2000 devices on the bench. Six PGN are adjustabl...

This is a NMEA 2000 simulator using the Teensy 4.0 module (included). Useful for testing NMEA 2000 devices on the bench. Six PGN are adjustabl...