Teensy

This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse volt...

This is a Teensy 4.1 board with triple CAN connections and ethernet magjack. Two CAN 2.0B and one CAN FD. It can be powered by an external +1...

This is a Teensy 4.1 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse volt...

This board uses the Teensy 4.0 as a CAN FD to USB converter. The Teensy 4.0 has high speed 480Mbit/s USB HS interface. MCP2558FD CAN FD transcei...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 480x320 3.5" capacitive touch screen with ILI9488 LCD cont...

This is a CAN FD and LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN FD and LIN-...

This is a Teensy 4.1 board with two Classic CAN and one CAN FD port, ethernet mag jack and u-blox NEO-M8M GNSS module. One board SMPS module can ac...

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It featur...

This is a CAN-Bus OBDII ECU simulator using the Teensy 4.0 module (included). Useful for testing OBDII interface and writing diagnostic softwa...

This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse vo...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector for use on a NMEA2000 network. This board includes a 800x480 5.0" ca...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector. This board includes a 480x320 3.5" capacitive touch screen with ILI...

This is a CAN FD and 2 channel LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN F...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 800x480 5.0" capacitive touch screen with SSD1963 LCD cont...

This is a Teensy 4.1 (installed) with dual CAN port. This board includes a 800x480 5.0" capacitive touch screen with SSD1963 LCD controller. Co...

This is a Teensy 4.1 board with two Classic CAN and one CAN FD port, ethernet mag jack and u-blox NEO-M8T GNSS module. One board SMPS module can ac...

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, w...

This is a Teensy 4.0 (installed) with two CAN2.0 and one CAN FD port. A 480x320 3.5" capacitive touch screen with ILI9488 LCD controller. Conn...

This is Teensy 4.0 board with CAN FD and a 1.54" 240x240 wide angle IPS TFT LCD display with microSD holder. Features Teensy 4.0 (installed...

This is a Teensy 4.0 board Classic CAN and CAN FD training board. On board are four potentiometers, LED, RGB LED and switches. This board can...

#4677This PSRAM is a 64 Mbit (8 Megabyte) serial pseudo SRAM device, organized in 8 M x 8 bits and in a compact SOIC-8 package. It is fabrica...

NMEA 2000 This is a Teensy 4.0 board with a 240x240 IPS LCD and a Micro-C connector. The board can be powered from the 12v Micro-C connector w...

This is a NMEA 2000 simulator using the Teensy 4.0 module (included). Useful for testing NMEA 2000 devices on the bench. Six PGN are adjustabl...

DEV-16885 Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the M...