Products

A basic mbed LPC1768 Starter kit. Kit Contents mbed NXP LPC1768 Microcontroller module License key for online tools USB cable Pinout c...

Kit Contents mbed NXP LPC1768 Microcontroller module License key for online tools USB cable Pinout card Breadboard with 840 contacts...

This board, which works with the groundbreaking mbed tool suite, lets you create a functioning prototype faster than ever. The tightly coupled comb...

The 33290 is a serial link bus interface device designed to provide bi-directional half-duplex communication interfacing in automotive diagnostic a...

8-Bit I/O Expander With I2C Serial Interface. Features High speed I2C interface up to 1.7MHz 8-Bit biderectional I/O ports 3 Hardware addr...

This is a MCP23017-E/SP 16-bit I/O Expander with I2C interface.Features High-speed I2C interface 100 kHz 400 kHz 1.7 MHz Three hardware address ...

MCP2551-I/P CAN BUS driver chip, DIL08 package, industrial temperature range. Can be fitten into IC sockets on some Modtronix board. Also availab...

MCP3002 10-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedd...

This MCP3008 adds ADC Converter 8-Ch 10 Bit with SPI Interface for your Raspberry Pi.  Features Analog inputs programmable as single-ended or p...

Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it can! Th...

The MCP4802 is a dual channel 8-bit DAC with internal voltage reference. This device offers high accuracy and low power consumption, and is av...

#1782 This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's...

This is a metal case for use with the PiCAN-M board and the Raspberry Pi 4. Features Designed for PiCAN-M and Raspberry Pi 4. Made from met...

        This is a metal case for use with the PiCAN-M board and the Raspberry Pi 4. Attached to the case is a DIN rail plate for mount on a DIN rai...

This is a metal case for use with the PiCAN2,3 and PiCAN FD board and the Raspberry Pi 4.Features Designed for PiCAN2, PiCAN3 and PiCAN FD for Ras...

sku: SEN-09404    This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing  natural gas (composed of mostly Methane [CH4])...

Pololu item #: 1350 The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB inter...

This is a Microchip dsPIC33CK256MP502 CAN FD demonstration board. The micro-controller has 256kb flash and 24kb ram. It has on board CAN FD tran...

This is a breakout board with the Microchip MCP2518FD CAN FD controller and the MCP2562FD CAN Bus transceiver.  Features  Conforms to ISO1...

sku: DEV-09802 Running out of memory space in your Arduino project? The microSD Shield equips your Arduino with mass-storage capability, so you can...

This is a unique board recommended by a SparkFun customer. When playing with microSD, you sometimes need to view what the SPI traffic is doing, whe...

sku: PRT-09545  Description: Do you need a lot of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. Tra...

DEV-12923 The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED dis...

DEV-12924 The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED dis...

sku: DEV-09595 The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequen...

The Mifare 1K contactless smart card is based on NXP MF1 IC S50, which is connected to a coil with a few turns and then embedded into plastic to fo...

Pololu item #: 1352 The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB inte...

Pololu item #: 1354 The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB inte...

Pololu item #: 1356 The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB inte...

Miniature Single Pull Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mounts...

USB cable with a A to Mini B connector. Colour white (colour supplied may vary).

#931These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32...

#661These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32...

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, bu...

sku: DEV-09904 MinM is a tiny smart LED that is designed for wearable, handheld and lighting devices. Like BlinkM, its larger sibling, MinM runs t...

The world's first and only open-source hardware charger: The MintyBoost®! New version! Works with the new iPhone 4 and more! Please review the Mint...

FEATURES NRF24L01 2.4GHz low power transciever UEXT to connect to host microcontroller (standard connector on our ARM development boards) SPI 0-...

This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This...

#326These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64...

#938These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x...

sku: DEV-10182 This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-brid...

sku: DEV-10628  This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage func...

sku: WIG-11029 Make some noise with your next project! The MP3 Trigger board is built to make it MP3 sound integration easier than ever. The board...

sku: SEN-09721 Now mounted on a breakout board, the MPL115A1 is a digital barometric pressure sensor that uses MEMs technology to give accurate pr...

SEN-11084 Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (...

  Features  1.5% Maximum Error Over 0° to 85°C Specifically Designed for Intake Manifold Absolute Pressure Sensing inEngine Control Systems ...

Seeed music shield is an ipod/iphone dock compatible shield, can work on ATmega168 and ATmega328 based board like Arduino or Seeeduino v328, Seeedu...

DEV-11723Sometimes you've got way too many inputs, or outputs... or both. How are you going to get them all connected to your Arduino? The Mux Shie...