Products

COM-11409 For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm ...

sku: COM-09765 The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The d...

sku: COM-09767 The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The di...

sku: COM-09766 The 7-Segment Serial Display turns the thirteen pins necessary to control a 4-digit 7-segment display into just one or three. The di...

7.5m (25ft) RS232 M-F extension cable with 9way D female to 9way D male connector. All 9 wires are present.  

A 7.5v 1A switching PSU with a 2.1mm power connector. This is a wall plug with UK 3pin style mains plug. Features AC ADAPTOR, 7.5V, 1A REGULATED...

  Features 74HC CMOS, 74HC595, DIP16, 5V Logic IC Function:8bit Ser-In/Ser or Par-Out Latched Shift Register (3-State) Logic IC Family:HC Logic...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that...

  Ideal match for 'easy-radio' ER 900 series modules Right angle SMA connector Wide operating temperature Performance matched for 868-915M...

  Ideal match for 'easy-radio' ER 900 series modules Straight SMA connector Wide operating temperature Performance matched for 868-915M...

SEN-10736  The 9DOF Razor IMU incorporates three sensors - an ITG-3200 (triple-axis gyro), ADXL345 (triple-axis accelerometer), and HMC5883L (tripl...

sku: SEN-10724 The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC588...

A light weight and compact PSU switch mode. Features Input voltage 100-240v Output voltage +9v Output current 1.6A UK style mains plug...

A light weight and compact PSU switch mode. Features Input voltage 100-240v Output voltage +9v Output current 600mA UK style mains plu...

This simple cable has so many uses! Plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel j...

The A4983 stepper motor driver carrier is a breakout board for Allegros easy-to-use A4983 microstepping bipolar stepper motor driver. The driver fe...

The A4983 stepper motor driver carrier with voltage regulators is a breakout board for Allegro's easy-to-use A4983 microstepping bipolar stepper mo...

This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; we ther...

Grey ABS plastic case can take electronic circuit boards. The top has a recess for labels and or membrane keypads.  The same recess is on the botto...

This is a laser cut acrylic case for the Bus Pirate board. Supplied with bumper feet and screws. Requires assembling. Bus Pirate not included.

sku: BOB-08882 This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current ...

#1187This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) curre...

This board is a simple carrier for Allegro's ±5A ACS714 Hall effect-based linear current sensor. This version accepts a bidirectional current input...

sku: SEN-14544 The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to modera...